標準編號

標準中文名稱

標準英文名稱

GB/T13930-1992

水環真空泵和水環壓縮機氣量測定方法

Methods for the measurement of volume flow of gas ofwater-ring vacuum pump and compressor

GB/T13929-1992

水環真空泵和水環壓縮機試驗方法

Methods of testing for water-ring vacuum pumps and compressors

JB/T5971-1992(2005復審)

單級多旋片式真空泵

JB/T7266-1994

容積真空泵 性能測量方法

JB/T7255-1994(2005復審)

水環真空泵和水環壓縮機

JB/T8472.1-1996

蒸汽流真空泵性能測定 部分:抽氣速率(體積流率)的測定

JB/T8472.2-1996

蒸汽流真空泵性能測定 第二部分:臨界前級壓力的測定

JB/T1246-1997

滑閥真空泵

JB/T9808.1-1999

奶用真空泵 技術條件

JB/T9808.2-1999

奶用真空泵 試驗方法

JB/T8106-1999

容積真空泵噪聲測量方法

JB/T8944-1999

單級旋片真空泵

JB/T8107-1999

容積真空泵振動測量方法

JB/T10134-1999

帶真空泵交流發電機 技術條件

JB/T53019-1999

油擴散真空泵 產品質量分等

JB/T53022-1999

滑閥真空泵 產品質量分等

JB/T53014-1999

單級多旋片真空泵 產品質量分等

JB/T53018-1999

羅茨真空泵 產品質量分等

JB/T53017-1999

旋片真空泵 產品質量分等

JB/T53016-1999

往復真空泵 產品質量分等

JB/T53299-1999

單級水環真空泵 產品質量分等

JB/T53020-1999

油擴散噴射真空泵 產品質量分等

JB/T53301-1999

兩級水環真空泵 產品質量分等

NF E51-291-1996

壓縮機和真空泵.安全要求.第2部分:真空泵

(Compressors and vacuum pumps. Safety requirements. Part 2 : vacuum pumps.)

NF E51-290-1996

壓縮機和真空泵.安全要求.第1部分:壓縮機

(Compressors and vacuum pumps. Safety requirements. Part 1 : compressors.)

NF X10-501-1976

真空技術.詞匯.真空泵

(Vacuum technology. Vocabulary. Vacuum pumps.)

ANSI/ASME PTC 9-1974

性能試驗規范.容積式壓縮機、真空泵和鼓風機

(Performance Test Code - Displacement Compressors, Vacuum Pumps and Blowers)

ANSI/UL 1450-2003

電動空氣壓縮機、真空泵和涂漆設備

(Motor-Operated Air Compressors, Vacuum Pumps, and Painting Equipment )

ASME PTC 9 Erratum-1972

容積式壓縮機,真空泵和鼓風機.正誤表

(Displacement compressors, vacuum pumps, and blowers; Erratum)

ASME PTC 9-1970

容積式壓縮機,真空泵和鼓風機

(Displacement compressors, vacuum pumps, and blowers)

BS EN 1012-1-1997

壓縮機和真空泵.安全要求.壓縮機

(Compressors and vacuum pumps - Safety requirements - Compressors)

BS EN ISO 14847-1999

轉式變容真空泵.技術要求

(Rotary positive displacement pumps - Technical requirements)

BS EN 1012-2-1997

壓縮機和真空泵.安全要求.真空泵

(Compressors and vacuum pumps - Safety requirements - Vacuum pumps)

EN 1012-1-1996

壓縮機和真空泵 安全要求 第1部分：壓縮機

Compressors and vacuum pumps - Safety requirements - Part 1: Compressors

EN 1012-2-1996

壓縮機和真空泵 安全要求 第2部分：真空泵

Compressors and vacuum pumps - Safety requirements - Part 2: Vacuum pumps

DIN EN 1012-1-1996

壓縮機和真空泵.安全要求.第1部分:壓縮機

(Compressors and vacuum pumps, safety requirements - Part 1: Compressors; German version EN 1012-1:1996)

DIN EN 1012-2-1996

壓縮機和真空泵.安全要求.第2部分:真空泵

(Compressors and vacuum pumps, safety requirements - Part 2: Vacuum pumps; German version EN 1012-2:1996)

DIN 28432-1996

真空技術.膜片真空泵的驗收規則

(Vacuum technology - Acceptance specifications for diaphragm vacuum pumps)

DIN 45635-13-1977

機器噪聲測量.空氣載聲測量.包面法.空氣壓縮機包括真空泵（活塞式.渦輪式和噴射式壓縮機）

(Measurement of airborne noise emitted by machines; enveloping surface method, compressors, vacuum pumps included (displacement-, turbo- and jet compressors))

DIN 28426-2-1976

真空技術.旋轉活塞真空泵的驗收規則.高真空范圍內的搖桿式活塞真空泵

(Vacuum technology; acceptance specifications for roots vacuum pumps for the range of medium vacuum)

DIN 28400-2-1980

真空技術.名稱和定義.真空泵

(Vacuum technology; terms and definitions, vacuum pumps)

DIN ISO 3019-3-1984

液壓傳動.變容真空泵和馬達.裝配法蘭盤和軸端的尺寸及識別代碼.第3部分:多邊形法蘭盤(包括圓形法蘭盤)

(Hydraulik fluid power; positive displacement pumps and motors; dimensions and identification code for mounting flanges and shaft ends; part 3: polygonal flanges (including circular flanges))

DIN ISO 3019-2-1991

液壓傳動.變容真空泵和馬達.裝配法蘭盤和軸端的尺寸及識別代碼.第2部分:兩孔與四孔法蘭與軸端.米制系列

(Hydraulic fluid power; positive displacement pumps and motors; dimensions and identification code for mounting flanges and shaft ends; part 2: 2 and 4-hole flanges and shaft ends, metric series; identical with ISO 3019-2:1986)

DIN 28426-1-1983

真空技術.旋轉真空泵.在近似真空和高真空范圍內的閉塞閥真空泵和旋轉閥真空泵的驗收規則

(Vacuum technology; acceptance specifications for rotary plunger vacuum pumps, sliding vane rotary vacuum pumps and rotary piston vacuum pumps for the ranges of rough and medium vacuum)

DIN 28431-1987

真空技術.液體環式真空泵的驗收規程

(Vacuum technology; acceptance specifications for liquid ring vacuum pumps)

DIN 28427-1983

真空技術.蒸氣壓低于1mbar的擴散泵和蒸氣噴射真空泵的驗收規則

(Vacuum technology; acceptance specifications for diffusions pumps and vapour jet vacuum pumps for vapour pressures of the pump fluid 1 mbar)

DIN 28430-1984

真空技術.以蒸汽作為驅動介質的蒸汽噴射真空泵和蒸汽噴射壓縮機用測量規則

(Vacuum technology; rules for the measurement of steam jet vacuum pumps and steam jet compressors using steam as the working fluid)

JB/T6921-2004

羅茨真空泵機組

JB/T8540-2004

水蒸汽噴射真空泵

JB/T10462-2004

水噴射真空泵

JB/T7265-2004

蒸汽流真空泵

UL 1450-2003

電動空氣壓縮機、真空泵和噴漆設備

(Motor-operated air compressors, vacuum pumps, and painting equipment)

JIS B8384-2000

液壓.變容真空泵、機動泵和整體傳動裝置.穩態性能測定

(Hydraulic fluid power -- Positive displacement pumps, motors and integral transmissions -- Determination of steady-state performance)

JIS B8317-2-1999

蒸氣真空泵.性能特性的測定.第2部分:臨界后壓力的測定

(Vapour vacuum pumps --Measurement of performance characteristics -- Part 2: Measurement of critical backing pressure)

JIS B8323-2003

水封式真空泵

(Water ring vacuum pumps)

JIS B8317-1-1999

蒸氣真空泵.性能特性的測定.第1部分:流量容積比率的測定(泵速)

(Vapour vacuum pumps -- Measurement of performance characteristics -- Part 1: Measurement of volume rate of flow (pumping speed))

JIS B8385-2000

液壓.變容真空泵、機動泵和整體傳動裝置.參數定義和字母符號

(Hydraulic fluid power -- Pumps, motors and integral transmission -- Parameter definitions and letter symbols)

JIS Z8126-2-1999

真空技術.詞匯.第2部分:真空泵和相關條款

(Vacuum technology -- Vocabulary -- Part 2: Vacuum pumps and related terms)

ISO 1607-2-1989

變容真空泵.性能特性測量.第2部分:極限壓力的測量

(Positive-displacement vacuum pumps; measurement of performance characteristics; part 2: measurement of ultimate pressure)

ISO 16330-2003

往復式變容真空泵和泵裝置.技術要求

(Reciprocating positive displacement pumps and pump units - Technical requirements)

ISO 3529-2-1981

真空技術.詞匯.第2部分:真空泵和有關術語.三種語言版

(Vacuum technology; Vocabulary; Part 2 : Vacuum pumps and related terms Trilingual edition)

ISO 1608-2-1989

蒸汽真空泵.性能特性的測量.第2部分:臨界前級壓力的測量

(Vapour vacuum pumps; measurement of performance characteristics; part 2: measurement of critical backing pressure)

ISO 1608-1-1993

蒸汽真空泵.性能特性的測量.第1部分:容積流量速度的測量(泵速)

(Vapour vacuum pumps; measurement of performance characteristics; part 1: measurement of volume rate of flow (pumping speed))

QB/T1444-1992

ZBK型輕式兩葉羅茨真空泵

QB/T1445-1992

濕式羅茨真空泵性能測試方法

JB/T6533-2005

旋片真空泵

JB/T7674-2005

羅茨真空泵

JB/T7675-2005

往復真空泵

GB/T19955.1-2005

蒸汽流真空泵性能測量方法 第1部分：體積流率(抽速)的測量

GB/T19955.2-2005

蒸汽流真空泵性能測量方法 第2部分：臨界前級壓力的測量

GB/T19956.1-2005

容積真空泵性能測量方法 第1部分：體積流率(抽速)的測量

GB/T19956.2-2005

容積真空泵性能測量方法 第2部分：極限壓力的測量

JB/T8540-2004

水蒸汽噴射真空泵

JB/T10462-2004

水噴射真空泵